Canton C 500 Aktiv, Руководство по эксплуатации

Страница: 53 / 68

3 53
English
Automatic selection of BT input (SEL)
If this function is activated (AUT), the loudspeaker system switches automatically to the BT input as soon as it detects an audio signal from
the mobile device� When this function is deactivated (MAN) the input must be selected manually�
The device is supplied with this function deactivated (MAN)�
To activate/deactivate this function proceed with the following steps:
1
With the device switched on, press and hold the “Play Mode” key for more
than 3 seconds, until
AUT
appears on the display�
2
Press the “Play Mode” key again briefly, until
SEL
appears on the display�
3
Press the “” key to activate the function (AUT )�
4
Press the “Volume –“ key to deactivate the function (MAN)�
5
Exit the menu by again pressing and holding the “Play Mode” key for more
than 3 seconds� If no input has appeared within 10 seconds the device will
automatically exit the configuration menu��
Comment: Depending on the mobile device, when the Automatic function is activated the loudspeaker system can also switch to the
BT input when a message is typed or through other system sounds�
If the SEL function is activated (AUT), the BT input can no longer be selected via the “Input” button� In this mode the loudspeaker system
can be coupled with the mobile device independent of the chosen signal input�