Installation Instructions Model : Z3314--44
Further information Phone (03) 9761 4603 [email protected]
Under the sink, stack the supplied half ring
rubber gasket
22
, above the half ring
mounting plate
23
, and feed them onto the
stud. Then screw the mounting nut
24
, onto
the stud. Screw the mounting stud until the
half ring rubber gasket mates up with the
underside of the sink.
❿
Check the position on the spout body, then
tighten the nut using a 13mm spanner or
smooth jawed shifter.
Note
: The surface under mounting deck must be
flat. If the mounting surface is irregular, the nut
may not be secured, and the tap will be loose on
the sink.
7
Continue…….
⓫