CanTech
16
Work with pulses:
The time between pulses
Assigned Type=Pulse, 1.hr=(0..1), 2.hrs=0
Pulse lenght is calculated as follows
<Value> = <n> / <Constant>
where <n> is the number of CPU ticks ( 1s = 125*10^6/(3*2^8) ticks )
Constant = 40690,104 specifies delay in seconds
Measurement of immediate consumption
Assigned Type=Pulse, 1.hr=(0..1), 2.hrs=1
Immediate consumption is calculated as follows
<Value> = <Constant> * 40690,104 / <n>
Note: <n> may take up maximum 2^32, which corresponding about 29 hours
Des.m. – number of decimal places
Use – use the control limits
MIN, MAX, Hyst – parameters of limits
Trap, Mail – when exceeding the limits is sent trap, mail
Error – Trap, Mail - when fail is sent trap, mail
Output – Use – when exceeding the limits the output is activated
Negation – output operates in reverse
Number v. – which output is activated
