CanTech
13
Login(Logout) – used to log on to enable the save settings
IP address – IP address of card you want to set
In this window you can set the parameters of network. In addition you can enter:
SNMP trap IP(1,2) – target server for a trap and community
NB name – name card
UDP port – port for communication over UDP
User – username for administrator access
(Read, Write) community – community of SNMP protocol
NTP server - time server
Send mail – globally enable of sending mails
Enable shutdown ETH. – see. network settings using the HTTP
Modbus reverse – values are stored in registers in the reverse order of bytes
Reboot – resets the card to update the network parameters
Pasword - save the new password
5.2 HTML – setting texts
Using this window you can set texts of headers, alarms and values as through HTML.
