RESET BUTTON, AUX OUTPUTS & JP4, JP5, JP6
J:
JP4, JP5 and JP6
These jumpers are reserved for future use and factory testing purposes.
Please
DO NOT
change the factory setup.
J:
AUX OUTPUTS
These outputs are not active, except
GND
and
VOLT
that can be used for
RSSI testing.
See section
Measuring RSSI Voltage
for more information.
H:
RESET BUTTON
Press the reset button
after the
DIP switch
configuration is changed for
the changes to take effect.
Smartfob Receiver MN: SFR2RXB
Page 12 of 17
Installation Manual
July 2008 • Rev. 1.0
