H1000 Elevator Control
Page 11 of 20
Installation Guide
October 2015 • Rev. 1.7
Edit->Elevator Sets. Select 64 Floors.
Master and Slave Control Panel LED Indicators
H1000 control panels used in 32 to 64 floor elevator configurations use a second RS485
communication channel which enables the Master H1000 control panel to communicate to the
Slave H1000 control panels. There are LEDs associated with this communication channel, which
are described below.
All H1000 panels have 16 output relays, and each of these relays have an associated relay LED
which will illuminate when the relay is activated. These LEDs are labeled OLED1 to
OLED16.
OLED1
OLED16
