Canon XF300, Инструкция по эксплуатации

Страница: 80 / 213

Recording
80
3
Zooming
Approximate zoom speeds
(handle zoom rocker)
* When the zoom speed is too fast (less than 2 seconds end-to-end), the camcorder will have more trouble focusing automatically
while zooming.
Using the Wireless Controller or Optional Remote Control
The zoom speeds when using the wireless controller and when using an
optional or commercially available remote control connected to the
REMOTE terminal are different. When using the wireless controller, you
must press the record enable button and desired zoom button
simultaneously to zoom.
Setting the Zoom Speed
Perform the following procedure to set the zoom speed for the supplied
wireless controller. Refer to the following table for a summary of zoom
speeds when using the wireless controller or other remote controls.
1 Open the zoom [Speed Level] submenu.
[
l
Camera Setup] [Zoom] [Speed Level]
2 Select [Fast], [Normal] or [Slow] and then press SET.
3 Open the zoom [Wireless Controller] submenu.
[
l
Camera Setup] [Zoom] [Wireless Controller]
4 Select the desired level and then press SET.
• This setting affects both the wireless controller and optional remote
controls.
Zoom speeds
(wireless controller and optional remote controls)
[Handle Rocker H]/[Handle Rocker L]
setting
[Speed Level] setting
[Slow] [Normal] [Fast]
[1] (slowest) 5 min. 3 min. 1 min.
[16] (fastest) 4.5 sec. 2.5 sec. 1.8 sec.*
[
l
Camera Setup]
[
Zoom]
[ Speed Level]
[ Normal]
[
l
Camera Setup]
[
Zoom]
[
Wireless Controller]
Accessory Zoom speed
Wireless controller (supplied)
Constant zoom speed that is selected
from the menu.
Remote control without variable zoom speed
control (commercially available)
Constant zoom speed.
Remote control with variable zoom speed control
(optional ZR-2000 or ZR-1000 Zoom Remote
Controller, etc.)
Based on zoom speed setting.
RC-V100 Remote Controller
Variable speed: The greater the angle at
which the dial is rotated from the center,
the faster the zoom.
COP
Y