Canon XF300, Инструкция по эксплуатации

Страница: 103 / 213

103
Recording 3
Adding Shot Marks while Recording
Adding Shot Marks while Recording
When recording, you can flag an important shot in a clip by adding a
“shot mark” (
n
). There are two types of shot marks, shot mark 1 (
c
) and
shot mark 2 (
d
), and you can add either or both types to a single clip.
When the camcorder is in mode, you can add or delete shot
marks (
0
149). You can also display an index screen of all the shot
marks (
0
147), allowing you to find a particular scene in a clip more
quickly.
To add a shot mark to a clip while recording, you must first set in advance
an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]. You can
also press the SHOT1 button on the wireless controller to add the
c
mark.
1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]
(
0
117).
• To add both shot marks, set one assignable button to [Add Shot Mark 1]
and another assignable button to [Add Shot Mark 2].
2 While you are recording, press the assignable button at the
beginning of the shot you wish to mark.
• A message indicating the short mark will appear and the selected shot
mark will be added to the current frame of the clip.
• You can press the button again to add another shot mark. Up to 100
shot marks (
c
and
d
marks combined) can be added to a single clip.
NOTES
• There may be up to a 0.5 second delay from when you press the
button to when the camcorder adds the shot mark.
• When you are using interval recording or frame recording mode, you
cannot add shot marks to a clip.
• When a clip contains either shot mark,
n
will appear next to the clip’s
thumbnail in the playback index screen.
Operating modes:
COP
Y