background image

Custom Picture Settings

94

[Range], [Point]

–20 to 50 

(±0)

These settings control the lower part of the gamma curve (dark areas of 
the image).
[Level]: Raises or lowers the lower part of the gamma curve. 
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve. 

[Low Key Saturation]

[Activate]

[On], 

[Off]

Set this setting to [On] to enable the adjustment of color saturation in 
dark areas with the [Level] setting.

[Level]

–50 to 50 

(±0)

Specifies how saturated colors are in dark areas.

[Knee]

[Activate]

[On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with 
the following settings.

[Automatic]

[On]

, [Off]

Set this setting to [On] to enable the automatic adjustment of the [Knee] 
settings.

[Slope]

–35 to 50 

(±0)

[Point]

50 to 10

9

 

(95)

[Saturation]

–10 to 10 

(±0)

These settings control the upper part of the gamma curve (highlights of 
the image). By compressing the highlights, you can prevent parts of the 
image from being overexposed.
[Slope]: Determines the slope of the gamma curve above the knee point.
[Point]: Sets the knee point of the gamma curve.
[Saturation]: Adjusts the color saturation in the highlights.

Menu items

Setting options and additional information

Input

Outp

u

t

[Point]

[

Range

]

[Level]

Input

Output

Output

Input

[Slope]

[Point]

Содержание XA60






























































































































































Отзывы: