Canon XA60 Скачать руководство пользователя страница 34

Страница: 34 / 157

Recording Clips and Photos

Recording

Recording Clips and Photos

This section explains the basics of recording clips* and photos. For details on recording audio, refer to

Recording Audio

(

71).

* “Clip” refers to a single movie unit recorded with a single recording operation.

Basic Recording

When you use

mode to shoot video and take photos, the camcorder will automatically adjust

various settings for you. In

mode, you can manually adjust the focus, exposure and many other

settings according to your needs and preferences.

1 Open the lens barrier.

• Set the lens barrier switch to OPEN.

2 Set the camera mode switch to the desired

position.

• Set it to

(

mode) or

(

mode),

according to how you want to use the camcorder.

3 Set the power switch to CAMERA.

• The POWER/CHG indicator will illuminate in green.

To record video

Press the START/STOP button to begin recording.

• During recording,

will appear on the screen.

Additionally, if the handle unit is attached to the
camcorder, the tally lamp will illuminate.

• The ACCESS indicator will flash from time to time while

the clip is being recorded.

• Press the START/STOP button again to pause the

recording.

will change to

and the clip will be

recorded on the SD card selected for recording clips.
The camcorder will enter record standby mode. The tally lamp will also go out.

• You can also press the START/STOP button on the handle unit.
• If you set the onscreen assignable touch button to [

Start / Stop] (

88), you can touch the

button to start/stop recording.

To take photos

During record standby mode, touch [PHOTO].

• In the lower center of the screen, a green icon (

) will appear. Also, in the upper right of the screen,

{Ð

will appear with the icon of the SD card selected for recording photos. The ACCESS indicator

will illuminate momentarily as the photo is being recorded.

Operating modes:

[PHOTO]

Lens barrier
switch

POWER/CHG
indicator

ACCESS indicator

Recording

Содержание XA60






























































































































































Результаты поиска

Содержание XA60

Отзывы:

Canon XA60, Инструкция по эксплуатации, Страница: 34 / 157

Результаты поиска

Содержание XA60

Отзывы: