background image

Menu Description

112

Power management mode

> [System settings] >

 [Power management mode]

 

You can specify to turn the lamp or projector off automatically after a certain period 
if the projector and remote control are not used, or if there is no input signal.

HDMI image input

Set the type of equipment which is connected to the HDMI port. Note that to some extent, the 
[HDMI image input] setting determines which image modes are available. (

P70

)

Option

Function

Auto

Select when AV equipment will be connected. Image processing, menu 
displays, and other elements are adjusted for video equipment.

Computer

Select when a computer will be connected. Image processing, menu 
displays, and other elements are adjusted for a computer.

HDBaseT image input

Specify the type of equipment connected to the HDBaseT port. Note that to some extent, the 
[HDBaseT image input] setting determines which image modes are available. (

P70

)

Option

Function

Auto

Select when AV equipment will be connected. Image processing, menu 
displays, and other elements are adjusted for video equipment.

Computer

Select when a computer will be connected. Image processing, menu 
displays, and other elements are adjusted for a computer.

Option

Function

Disabled

Disable power management mode.

Lamp off

Only turns the lamp off.

Standby

Turns the projector off and puts it in standby.

• Projection resumes when the same input signal is restored, when the remote control or 

projector is operated, or when a user command to activate the projector is received.

• After the projector enters standby, restoring projection requires the same steps as when 

turning the projector on normally.

• When [Disabled] is selected, [Direct power on] (

P113

) is not available.

• This setting can also be adjusted from the power saver settings screen by pressing the 

LAMP

 button on the remote control.

Содержание WUX6010









































































































































































































Отзывы: