Installation-Related Menu Settings
155
Inst
alla
tio
n
an
d Main
te
nan
ce
Inst
allation
Here, you can use the following settings in the edge blending menu.
3
Set [Marker] to [On].
Marker lines are projected on the images. The red marker indicates the start
position for adjustment, and the green marker, the end position.
4
Select the position where the images overlap.
When you are adjusting the left image, this area is along the right edge of the
image. In the edge blending window, select [Side] > [Right].
Off
Do not blend overlapping areas.
Adjust
Display the menu for blending overlapping areas.
Side
Left,
Right,
Top,
Bottom
Width
Specify the width between the start and end
markers.
Start
position
Moves the start position marker.
Color
blending
adjustment
Off
Do not adjust colors of blended images.
Adjust
Adjust the color of overlapping area. (
Black level
adjustment
Off
Do not adjust the black level.
Adjust
Adjust the black level of non-overlapping image
areas. (
)
Marker
Off
Hide the markers.
On
Display markers showing the adjustable blending
area, with a red line at the beginning and a green
line at the end.
Reset
Reset the marker settings.
• If you have already completed edge blending settings, selecting [Adjust] will apply
them.
• To restore the default settings before adjustment, select [Reset].
By default, the green and red markers are displayed in the same position, so only the red
marker is visible.
Overlapping area
Left image
Right image