Installation-Related Menu Settings
147
Inst
alla
tio
n
an
d Main
te
nan
ce
Inst
allation
Specifying Vertical
Projection
> [Install settings] > [Professional
settings] >
[Vertical projection]
You can ensure adequate cooling by
switching the fan mode to suit
upward- or downward-facing
installations.
For precautions, see “Install Facing
in the Correct Direction” on
When the setting is completed, press
the
OK
button to accept your setting
and then press the
MENU
button.
• [Off] is the factory default.
Saving and Restoring
Lens Positions
> [Install settings] >
[Lens - Position]
The projector can save information
about the lens position in memory.
Up to three sets of lens information
(including focus, zoom, and lens
shift settings) can be saved, and the
lens can be restored to these
positions.
If the
OK
button or [ ] button is
pressed, the [Lens - Position] screen is
displayed.
Select using the [ ] / [ ] buttons.
The following options are available on
the [Lens - Position] screen.
Press the
OK
button to accept your
setting and then press the
MENU
button.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Off
Does not alter the fan mode.
Upward
Setting for use when the
projector faces upward
Downward
Setting for use when the
projector faces downward
• Be sure to perform this setting to use
vertical projection.
• Even if you complete this setting,
vertical projection will result in a
shorter useful life of the lamp and
other parts than horizontal
projection.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Load position
1–3
Restores the lens to the
positions saved using
Save position 1–3.
Save position
1–3
Saves the lens position as
positions 1–3.
Lens shift
reset
Restores the lens to the
original position.