Canon WFT-E6, Руководство пользователя

Страница: 11 / 37

11
When the camera is set to mode, connect the camera to an access point. You can save
up to 4 network configuration profiles for different networks and select which one to use
depending on where you plan to use the camera.
1
Set the camera to mode and open
the [Connection Settings] submenu.
[
w
System Setup]
>
[Network Settings]
>
[Connection Settings]
The current network configuration will be displayed
on the screen. Push the joystick up/down or turn
the SELECT dial to select a different network
configuration profile.
2
Press SET to display the connection
settings of the selected network
configuration.
The current connection settings will be displayed
on the screen.
To use the current settings, select [OK] and press
SET. The rest of the procedure is not necessary.
To change the settings, select [Edit], press SET
and continue with the next step.
3
Select the method you wish use to set
up the access point connection and
press SET.
Refer to the descriptions of each method (
A
7)
and select the most appropriate one depending on
the characteristics of the access point you plan to
use. Continue with the procedure explained in the
relevant page.
[WPS: Button], [WPS: PIN Code] (
A
12)
[Search for Access Points] (
A
14)
[Manual] (
A
15)
Infrastructure Connection