Canon WebView LivescopeMV, Руководство пользователя

Страница: 26 / 120

26
Camera Server Registration Wizards
A dialog box for confirming camera servers to be
registered appears. If you are satisfied with the list,
click Finish to complete registration. If you click
"Detected Camera Servers", the screen returns to
Step 2.
Camera server search and registration is not possible in the following cases
in Step 2 or later:
●
The camera server is not on the same LAN. (In this case, register the
camera server from "Register Camera Server". see p. 112.)
●
MV Manager cannot connect to the camera server, because the camera
server is not correctly connected to the network, the power switch on the
camera server is not turned on, etc.
●
The camera server setting does not permit MV Manager to access it.
●
The VB101 firmware has not been upgraded to Ver. 3.0.
c
Note
Step 3: Complete the settings
1
2
The camera servers are automatically given names.
If you want to change a name, click the camera
server icon to select it, then right click on the
selection. When the pop-up menu appears, choose
"Rename". Alternatively, you can double-click on the
camera server icon to display the camera server’s
properties. Click the General tab and change the
name there.
e
Tip
●
Please conduct a view test (see p. 64) to check to be sure that the camera
server has been correctly set.
●
Up to 100 camera servers can be registered.
3
The camera server to be registered appears in the
space below. To register more than one camera
server, repeat the process of selecting a camera
server, clicking Register, and entering the
Administrator ID and Password for each camera
server you want to register. Camera servers with the
same Administrator ID and Password can be
selected in multiples and registered at one time.
When finished, click OK.