Canon W6400 Series, Руководство по обслуживанию

Страница: 59 / 196

Chapter 2
2-15
T-2-3
Details of the cleaning function are shown in the table below.
T-2-4
Cleaning Mode Name Cleaning Description
Cleaning 1 Normal cleaning (Head
Cleaning A) Removes ink adhered due to nozzle drying, ink accumulated on
the face, and paper particles.
Cleaning 2 Ink level adjustment cleaning Adjusts the ink level in the head by suction and then performs
normal cleaning.
Cleaning 3 Initial filling cleaning Fills the ink when there is no ink in the tube (during initial
installation) and then performs normal cleaning.
Cleaning 4 Ink extraction during head
replacement Extracts the ink to replace the head. (Extracts only ink in the
head.)
Cleaning 5 Ink extraction during
secondary transport Extract the ink in the head and tube for secondary transport.
Cleaning 6 Normal (strong) cleaning
(Head Cleaning B) Performs suction stronger than when adjusting the ink filling
amount in the head or normal cleaning in order to clear clogged
nozzles.
Cleaning 7 Bk aging Performs Bk aging when ink is changed after head replacement
and then performs normal cleaning. (Bk only)
Cleaning 10 Ink filling during secondary
transport Fills the ink when there is no ink in the tube (during installation
after secondary transport) and then performs normal cleaning.
Cleaning 11 Sub-buffer ink extraction Extracts the ink in sub-buffer in order to change ink from Bk to
MBk or MBk to Bk.
Cleaning 12 Ink change (ink replacement) Replaces the ink from Bk to MBk or from MBk to Bk.
Cleaning 15 Y dot count suction Performs suction to remove Y ink adhered due to nozzle drying/
Y ink accumulated on face when the Y dot count reaches a
prescribed value or every 20 sheets.
Printer Status Cleaning Description Consumption
(reference)*1
At power on Initial installation Cleaning 3 (initial filling cleaning) Approx. 35g
When the power is turned ON at
least 1440 hours but less than 2160
hours have elapsed since the
previous ink level adjustment
suction or initial filling suction. *2 Cleaning 2 (ink level adjustment
cleaning) Approx. 11g
When the power is turned ON at
least 2160 hours have elapsed since
the previous ink level adjustment
suction or initial filling suction. *2 Cleaning 3 (initial filling cleaning) Approx. 35g
Power ON within 72 hours after
printing ends abnormally *3 Cleaning 1 (normal cleaning) Approx. 1g
Power ON when 72 hours have
elapsed since printing ends
abnormally *3 Cleaning 6 (normal (strong)
cleaning) Approx. 6g
Before printing Before printing within 48 hours
since previous print end Wiping and maintenance jet (Y/M/
PM: 2000 shots C/PC: 1400 shots Bk:
700 shots) Approx. 0.06g
Before printing after at least 48
hours but less than 96 hours since
the previous end of printing Cleaning 15 (Y dot count suction) Approx. 0.3g
Before printing after at least 96
hours since the previous end of
printing Cleaning 1 (normal cleaning) Approx. 1g
When prescribed amount of ink is
discharged after previous ink level
adjustment suction. Cleaning 6 (normal (strong)
cleaning) Approx. 6g
When at least 1440 hours but less
than 2160 hours have elapsed since
the previous ink level adjustment
suction. Cleaning 2 (ink level adjustment
cleaning) Approx. 11g
At least 2160 hours have elapsed
since the previous ink level
adjustment suction Cleaning 3 (initial filling cleaning) Approx. 35g
When an error occurs before
printing Cleaning 1 (normal cleaning) Approx. 1g
During printing Scan interval during printing Maintenance jet Bk 1 nozzle Bk/M/
Y 26 shots other 10
shots Bk 1 nozzle
26 shots
After printing ends When printing ends maintenance edge Approx. 0.02g