Canon W6400 Series, Руководство по обслуживанию

Страница: 178 / 196

Chapter 7
7-8
e) COUNTER
Displays the service life (number of operation times and time) of each unit and print counts for each media type.
The count values under this option can be printed using the "PRINT INF" option.
- PRINTER Counter for product life
T-7-6
- CARRIAGE Counter for carriage unit
T-7-7
- PURGE Counter for purge unit
PURGE This checks operation of the recovery system.
After the carriage is moved to the homeposition, the recovery suction operation
is performed independently in the recovery system.
INK VALVE Operation check of ink supply valve.
This drives the valve motor and performs one rotation of the ink supply valve
cam.
LF MOTOR This checks operation of the feed motor.
The media is moved forward 500 mm and then stopped regardless of whether
media is loaded or not.
CR MOTOR This checks operation of the carriage motor.
The carriage moves back and forth once at the maximum printing width
regardless of whether media is loaded or not.
MT-CARTRIDGE This checks the presence of maintenance cartridge.
"CHECK END" is displayed if a proper maintenance cartridge is installed.
Otherwise "ERROR E02818" is displayed.
CUTTER This checks operation of the cutter.
If this mode is executed when the printer is set to roll media mode, the printer
repeats the operation of feeding the roll media by approximately 100 mm and
cutting until the specified number of times is reached regardless of whether roll
media is loaded or not. (Setting range: 1 to 999 times)
The printer switches to the roll media setting if this mode is executed when the
printer is in cut sheet mode.
Display Description Unit
LIFE Number of printed media expressed as A1 equivalent (for
checking printer durability) sheets
POWER ON Cumulative power-on time Hours
POWER ON(2) For factory -
POWER ON(3) For factory -
LF DIST. Cumulative feed distance of feed roller (210 mm/sheet) sheets
LF DIST.(2) For factory -
LF DIST.(3) For factory -
W-INK Maintenance cartridge tank full detection counter ml
CUTTER Number of cutter usages times
WIPE Wiping operation count times
Display Description Unit
PRINT Cumulative printing time Hours
DRIVE Cumulative carriage driving time Hours
CR COUNT Cumulative carriage scan count (one back-and-forth motion = 1) times
CR COUNT(2) For factory -
CR COUNT(3) For factory -
CR DIST. Cumulative carriage scan distance (210 mm/sheet) sheets
CR DIST.(2) For factory -
CR DIST.(3) For factory -
PRINTCOUNT Cumulative print end count times
PRINTCOUNT(
2) For factory -
PRINTCOUNT(
3) For factory -