Canon W6400 Series, Руководство по обслуживанию

Страница: 171 / 196

Chapter 7
7-1
7.1 Service Mode
7.1.1 Service Mode Operation
0008-6573
a) How to enter Service mode
Follow the procedure below to enter Service mode.
1) Turn off the printer.
2) Turn on the printer while holding down the [Paper Source] button and [Information] button.
3) Check that "Initializing" is shown on the display, and then release the buttons.
4) When paper has been loaded, pressing the [Online] button twice shows "SERVICE MODE" on the display. When no paper has been loaded, pressing
the he [Online] button once shows "SERVICE MODE" on the display.
5) Use the button to make a selection.
Service mode is added to the options in the Main menu.
Service mode can be entered even during error status (when Exxxx and Wxxxx are shown on the display) by turning the power off and then using the above
key operation.
b) How to exit Service mode
To exit Service mode, turn off the printer.
c) Buttons used in Service mode
- Selecting menus and parameters: button or button
- Entering a lower-level menu: button
- Entering a higher-level menu: button
- Setting menus and parameters: [OK] button
7.1.2 Map of the Service Mode
0008-6574
The hierarchy of menus and parameters in the Service mode is as shown below.
F-7-1
ADJUST PRINT PATTERN
LF
(FUNCTION)
DISPLAY
PRINT INF
SYSTEM
YES
NO
TYPE
TMP BK
TMP C
TMP M
TMP Y
TMP PC
TMP PM
SIZE LF
SIZE CR
S1
L1
BK
C
M
Y
PC
PM
HEAD
ERROR
WARNING
INK
SERVICE MODE
HEAD
OPTICAL AXIS
INK CHECK
NOZZLE CHE POS.
01~20
01~20
ADJ. SETTING
RESET SETTING
A1 -127 127
(A3, A4 to A6, B1 to
B6, C1...)
E6
-127 127
A2
-127 127
YES
NO
YES
NO
(I/O DISPLAY) *To be supported by next version
NOZZLE
System Setup
Test Print