Canon VIXIA HF R42, Инструкция по эксплуатации

Страница: 165 / 197

Additional Information
Š 165
6
/
4
Built-in memory is full
- The built-in memory is full ([
&
End] appears on the screen). Delete some recordings
(
A
56, 58) to free some space. Alternatively, save your recordings (
A
111) and initialize
the built-in memory (
A
33).
6
/
4
Built-in memory writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the built-in memory. Select [Recover]
to try to recover the recordings.
6
/
4
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert scenes recorded at 60P
- Scenes that were recorded at 60P cannot be converted to MP4.
Cannot convert the scene
- You cannot convert scenes recorded using another device.
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card ( A 56, 58) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes).
Delete some scenes (
A
56) to free some space.
Cannot divide the scene
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Delete some scenes ( A 56) and photos ( A 58) and try dividing the scene again.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Delete some scenes (
A
56) and photos (
A
58) and try dividing the scene again.
Cannot join 24P and 30P scenes to convert them
- Scenes recorded with a frame rate of 24P cannot be joined with those recorded with a frame
rate of 30P.
Cannot load canvas
- The canvas file that was saved on the memory is corrupted.
- Canvas data cannot be read from canvas files created using other devices.
Cannot play back
- You may not be able to play back scenes recorded or edited using another device.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
COP
Y