Canon varioPRINT 600 TITAN Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 87

Canon varioPRINT 600 TITAN Series Скачать руководство пользователя страница 46

Canon

varioPRINT 6000 TITAN Series Service Guide

varioPRINT 6000 TITAN Series

Service Guide

April 2021

Revision 1

Page 40

E.

Estimated Installation Times

The table below indicates the estimated length of time needed to unpack and
install the main unit and optional accessories, calculated from the average
amount of labor hours. The estimated unpack and installation times are based
on a minimum of two (2) experienced technicians unless otherwise specified.

IMPORTANT

Setup time varies due to many factors, most of which the installation technician
has little control over. Some obstacles may include:

•

Forklift availability and its operator

•

Narrow hallways or a need to remove doors to enter rooms

•

Uneven or damaged floors making leveling equipment difficult and time
consuming

With the above-mentioned obstacles considered, an installation of varioPRINT
6000 TITAN Series Main Unit can take longer than the estimated total times
below.

Table 35 – Estimated Installation Times

Estimated Installation Times

Description

Estimated

Installation Time

Main Unit Minimum Configuration

6 hours

Main Unit Maximum Configuration

12 hours

Booklet Maker (Including the connecting bridge)

6 hours

Book Stacker

2.5 hours

P2T 2-Knife Trimmer

3 hours

BGB3202 Perfect Binder

5 days

Light Weight Media Kit-A1

4 Hours

63 Minimum Configuration: Main Engine, One PIM, Input Interface Module and One High Capacity Stacker with set Finisher
64 Maximum configuration : Main Engine, Three PIMs, Input Interface Module, One High Capacity Stacker with Finisher, and Two

additional High Capacity Stackers

65 The estimated installation time includes a Canon USA Engineer training two (2) dealer service technicians.
66 The estimated installation time of the Light Weight Media Kit includes installation and adjustment when the air supply is

available at the time of installation.

«
...
44
45
46
47
48
...
»

Содержание varioPRINT 600 TITAN Series
























































































Отзывы:

Нет отзывов