Canon TS6400 Series Скачать руководство пользователя страница 361

Страница: 361 / 439

White Streaks Appear

Check1

Check paper and print quality settings.

Printout Results Are Unsatisfactory

Check2

Make sure of the estimated ink levels in the FINE cartridges.

When a FINE cartridge runs out of ink, replace empty FINE cartridges with a new one.

Checking Ink Status on the LCD
Replacing a FINE Cartridge

Check3

Is the FINE cartridge installed properly?

• Check that there is no orange tape left on the FINE cartridge.

If the orange tape remains on the FINE cartridge, peel it off.

• If you do not close the ink cartridge locking cover correctly, ink may not be ejected correctly.

Open the scanning unit / cover to open the ink cartridge locking cover, and then close it.

Press down the ink cartridge locking cover until it clicks into place.

Check4

Are the print head nozzles clogged?

361

Содержание TS6400 Series
























































































































































































































































































































































































































































Результаты поиска

Содержание TS6400 Series

Отзывы:

Бренды по названию

Популярные бренды

Canon TS6400 Series, Онлайн-руководство

Результаты поиска

Содержание TS6400 Series

Отзывы:

Бренды по названию

Популярные бренды