manualshive.com logo in svg

Canon TS6400 Series, Онлайн-руководство

Поделиться
Скачать
Canon TS6400 Series Скачать руководство пользователя страница 129

• Do not place the printer on a thick rug or carpet.
• Do not place the printer flush against a wall.

Power Supply

• Keep the area around the power outlet clear at all times so you can easily unplug the power cord if

necessary.

• Never remove the plug by pulling on the cord.

General Notices

• Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak.
• Do not place anything on top of the printer. Be especially careful to avoid metal objects such as

paper clips and staples, and containers holding flammable liquids such as alcohol or thinner.

• Be sure to observe the following when loading the original on the platen. Failure to observe the

following may cause the scanner to malfunction or the platen glass to break.

◦ Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
◦ Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down

the original.

• Do not attempt to open, disassemble or modify the FINE cartridges. Ink may leak and damage your

printer.

• Do not throw FINE cartridges in the fire.

129

Содержание TS6400 Series
























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды