Canon Super G3 Fax Board-AF1, Руководство по обслуживанию

Страница: 71 / 74

Chapter 6
6-3
##762 [T] at time of ECM transmission, DCN is received after transmission of PPS-EOM.
##763 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, or T5 time-out
(60 sec) has occurred.
##764 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOM.
##765 [T] at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal to be transmitted
more than specified.
##767 [T] at time of ECM transmission, DCN is received after transmission of PPS-EOP.
##768 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP, or T5 time-out
(60 sec) has occurred.
##769 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP.
##770 [T] at time of ECM transmission, no meaningful signal is received after transmission of EOR-NULL, causing the procedural signal to be
transmitted more than specified.
##772 [T] at time of ECM transmission, DCN is received after transmission of EOR-NULL.
##773 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-NULL, or T5 time-
out (60 sec) has occurred.
##774 [T] at time of ECM transmission, ERR is received after transmission of EOR-NULL.
##775 [T] at time of ECM transmission, no meaningful signal is received after transmission of EOR-MPS, causing the procedural signal to be
transmitted more than specified.
##777 [T] at time of ECM transmission, DCN is received after transmission of EOR-MPS.
##778 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission EOR-MPS, or T5 time-out
(60 sec) has occurred.
##779 [T] at time of ECM transmission, ERR is received after transmission of EOR-MPS.
##780 [T] at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOM, causing the procedural signal to be
transmitted more than specified.
##782 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOM.
##783 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOM, or T5 time-
out (60 sec) has occurred.
##784 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOM.
##785 [T] at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOP, causing the procedural signal to be
transmitted more than specified.
##787 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOP.
##788 [T] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOP, or T5 time-out
(60 sec) has occurred.
##789 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOP.
##790 [R] at time of ECM reception, ERR is transmitted after transmission of EOR-Q.
##791 [T/R] while ECM mode procedure is under way, a signal other than a meaningful signal is received.
##792 [R] at time of ECM reception, PPS-NULL cannot be detected over partial page processing.
##793 [R] at time of ECM reception, no effective frame is received while high-speed signal reception is under way, thus causing time-out.
##794 [T] at time of ECM reception, PPR with all 0s is received.
##795 [T/R] a fault has occurred in code processing for communication.
##796 [T/R] a fault has occurred in decoding processing after reception of ECM
No. T/R Description