Canon Super G3 Fax Board-AF1, Руководство по обслуживанию

Страница: 43 / 74

Chapter 5
5-1
5.1 Outline
5.1.1 Using Service Mode
0025-3084
1) Press the User Mode key " " on the control panel.
2) Press the keys 2 and 8 on the keypad at the same time.
3) Press the User Mode key " " on the control panel once again.
The machine will indicate the accessories that are connected to it (e.g., FEEDER, FAX, BOARD).
Select [FAX] to use service mode items available for the Board.
F-5-1
COPIER: service mode of the host machine.
FEEDER: service mode of the ADF. (*)
FAX: service mode of the fax. (*)
BOARD: service mode of an accessory board. (*)
*: Indicated only if installed.
For instance, in the case of #1 SSSW, the following holds true; key functions and operations are the same for all screens:
F-5-2
- If you want to change 0 to 1 or 1 to 0 on a bit switch, press the desired bit (number) directly.
- If you want to store a change or execute an item, press the OK key.
- Use the keypad to enter a numerical value.
- To return to the previous level of selection, press the Reset key.
If you changed a setting in service mode, be sure to turn off and then on the power (making sure that you first turn off the control panel switch and then the main
power switch).
The settings made in service mode are stored on the hard disk. The settings associated with the Board are loaded to the G3 fax control PCB only when the main power
is tuned on, thus requiring you to turn it off and then on after making a change.
COPIER
FEEDER
SORTER
BOARD
FAX
SERVICE MODE LEVEL 1
<1/7>
<READY>
Report
Sssw Menu Num Ncu Type ISDN Print Clear Test
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW01
SW02
SW03
SW04
SW05
SW06
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW07
SW08
OK
Press to accept the current input. Previous Page/Next Page key