Canon Super G3 Fax Board-AF1, Руководство по обслуживанию

Страница: 44 / 74

Chapter 5
5-2
5.2 Setting of Bit Switch (SSSW)
5.2.1 Outline
5.2.1.1 Bit Switch Composition
0025-3086
The registration/setup items of the switch are set according to the positions of its 8 bits; the bit switch shown on the display is as follows, each bit being either 0 or 1:
F-5-3
F-5-4
5.2.2 SSSW-SW01
5.2.2.1 Functional Construction
0025-3087
T-5-1
5.2.2.2 Detailed Discussions of Bit 0
0025-3088
Selects whether or not service error codes are output.
When output is selected, service error codes are displayed and in reports.
5.2.2.3 Detailed Discussions of Bit 1
0025-3089
Selects whether or not error dump lists are output.
When selecting 'output', the error transmission report and the reception result report at the time of error to which the error dump list is attached are output.
Do not change service data identified as "not used"; they are set as initial settings.
Bit Function 1 0
0 service error code output not output
1 error dump list output not output
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 not used - -
SW01 0 0 0 0 0 0 0 0
Bit 7
Bit 0
<1/7>
<READY>
Report Sssw Menu Num Ncu Type ISDN Print Clear Test
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW01
SW02
SW03
SW04
SW05
SW06
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW07
SW08
OK