manualshive.com logo in svg

Canon SmartBase MPC400, Руководство по обслуживанию

Поделиться
Скачать
Canon SmartBase MPC400 Скачать руководство пользователя страница 40

2-10

SmartBase MPC600F/MPC400  Chapter 2: Technical Reference

3.3 About the Ink Sensor

Consisting of an LED and photo sensor, the ink sensor uses optical means to detect whether there is ink in

the ink tank.
At the bottom of the ink tank is an indentation that works like a prism.

When there is ink in the ink tank, the refractive index of the ink and the prism's resin material is about the
same. Therefore, the reflected amount of light is small.

When the ink is exhausted, the refractive index of the air and the prism's resin is very different, so all the
light entering the sensor is reflected and the amount of reflected light is high.

The ink sensor detects the difference in the reflected light amount to determine whether or not there is ink
in the tank. The MPU detects the voltage that changes according to the change in the reflected light
amount. The analog value that is input is converted to a digital value by an internal A/D converter.

When the printer detects no ink in the ink tank, it indicates "ink low" on the status monitor for the
respective ink tank. After the printer detects no ink in the ink tank, it starts to count the number of ejected

dots corresponding to the amount of ink (about 20% of the ink amount) in the sponge and it starts to detect
the no-ink error.

This error is detected in the following cases: While the power is ON, when the flatbed ass'y is closed, after
the pumping operation, or after the set number of dots have been printed. If the flatbed ass'y is opened
during the ink amount measurement, the external light may prevent an accurate measurement. The

presence of an ink tank will also not be detected. If there is no ink tank, there will be no reflected light and
the printer will therefore assume that there is ink.

Figure 2-7 Ink Sensor

Incident

Light

Reflected
Light

Refracted

Light

Ink

Ink Sensor

Ink Present

Photo

Transistor

Photo Transistor

Reflected Light
(Completely Reflected)

Air

No Ink

Incident

Light

Ink Sensor

Ink Tank

Prism

Содержание SmartBase MPC400




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды