manualshive.com logo in svg

Canon SmartBase MPC400, Руководство по обслуживанию

Поделиться
Скачать
Canon SmartBase MPC400 Скачать руководство пользователя страница 109

4-25

SmartBase MPC600F/MPC400  Chapter 4: Maintenance & Service

Missing dots

Unstable printing

Splashed dots

Figure 4-7 Defective Pattern (Sample)

• Printing quality error

 • The printer does not at all.
 • Printing stops midway.
 • Certain colors are not printed.

(1) Check that the orange cap or tape is not on the BJ cartridge.

(2) Carry out nozzle cleaning on the BJ cartridge five times with the cleaning operation, than visually

cheek the test print for non-discharge of ink from nozzle. (

Fig. 4-7

)

(3) Remove and reinstall the BJ cartridge.
(4) Replace the appropriate ink tank.

(5) Replace the BJ cartridge.
(6) Replace the purge unit.

• Blotches appear
• Blank ink appear

(1) Carry out nozzle cleaning on the BJ cartridge five times with the cleaning operation, than visually

cheek the test print for non-discharge of ink from nozzle. (

Fig. 4-7

)

(2) Remove and reinstall the BJ cartridge.

(3) Replace the appropriate ink tank.
(4) Replace the BJ cartridge.
(5) Check the connection of the carriage ribbon cable and the PCNT board. (J1/J2/J3)
(6) Replace the carriage unit.

(7) Replace the PCNT board.
(8) Replace the purge unit.

Содержание SmartBase MPC400




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды