Canon R-F10 Скачать руководство пользователя страница 57

Страница: 57 / 70

– 45 –

7.3 Cleaning and Disinfection

7.3.4 Trackball

Clean the trackball if it does not rotate smoothly.

(1) Turn the trackball cover in counter-

clockwise direction to remove it.

NOTE: Trackball cover will be re-

moved with the trackball. Be
careful not to hit or drop the
trackball cover when the
trackball is attached to it, as
the trackball will fall out easily.

(2) Remove the trackball from the claws of the trackball cover.

(3) Wash the trackball in water.

(4) There are three rollers inside the aperture where the trackball was placed.

Wipe these rollers and the back of the trackball cover with a piece of cloth soaked in
water and wrung dry.

(5) After the trackball and other parts that have been wiped are dry, return the trackball to

the trackball cover.

(6) Return the trackball cover by aligning

the longer claw of the cover with the
arrow indicated on the edge of the
aperture.

NOTE: Cover will not fit into the hole

unless the longer claw is
properly aligned with the
arrow.

(7) Turn the trackball cover in clockwise

direction until it stops.

Trackball cover

Longer claw

Arrow

Содержание R-F10







































































Результаты поиска

Содержание R-F10

Отзывы:

Canon R-F10, Руководство по эксплуатации, Страница: 57 / 70

Результаты поиска

Содержание R-F10

Отзывы: