manualshive.com logo in svg

Canon R-F10, Руководство по эксплуатации, Страница: 24 / 70

Поделиться
Скачать
Canon R-F10 Скачать руководство пользователя страница 24

– 12 –

4.2 Measurement in FULL AUTO Mode

4.2 Measurement in FULL AUTO Mode

There are two modes of performing measurement; 

FULL AUTO

 and 

MANUAL

.

FULL AUTO mode is selected automatically when the power is turned ON or when the

PRINT

 switch is pressed.

The examiner can also choose FULL AUTO mode with the 

AUTO 

switch.

After displaying the examinee’s eye on the monitor, the examiner presses the 

START

 switch.

The instrument will then automatically perform the alignment, focusing and measurement.
It is also possible to have the instrument automatically measure the left eye successively
after measuring the right eye, and then print out the results.
In order to use the fully automatic function, set the options in SET mode (

→

 sections 6.1 and

6.2) as follows:
“

PRINT: ON

”

“

R–L MEASURE: ON

”

“

AUTO PRINT: ON

”

Select MANUAL mode with the 

MANU.

 switch when the pupil is eccentric, or when measur-

ing a certain examinee is apt to result in error.
See section 4.3 for the procedure for manual measurement.

Содержание R-F10







































































Отзывы:

Нет отзывов