manualshive.com logo in svg

Canon R-F10, Руководство по эксплуатации, Страница: 22 / 70

Поделиться
Скачать
Canon R-F10 Скачать руководство пользователя страница 22

– 10 –

4.1  Preparation

When the checks are completed,
FULL AUTO mode will be selected
and the measurement head will move
and stop at the right eye side.

NOTE: Because the measurement

head moves during initializa-
tion, do not have the examinee
place his/her face on the chin
rest until the initialization is
completed.

2

Check the settings

Check and change the settings concerning measurement and printing as required (

→

sections 6.1 – 6.2).
If you want to print a message with the result, enter it (

→

 sections 6.3).

Vertex distance can be selected by
pressing the 

VD

 switch.

Each time the switch is pressed,
vertex distance changes (12.0 or 13.5,
whichever is selected in SET mode 

→

0.0 

→

12.0/13.5 

→

 0.0...), and result

changes accordingly.

PD: – –

 VD:13.5

No. 00001

FULL AUTO(3)

RIGHT

SPH

CYL

AX

   1:

0.0

PD: – –

 VD:13.5

No. 00001

FULL AUTO(3)

RIGHT

SPH

CYL

AX

   1:

Содержание R-F10







































































Отзывы:

Нет отзывов