128
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
4
P Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
Disconnected/Receiving failed/Sending failed
●
You may be in an environment where Wi-Fi signals are obstructed.
●
Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth
devices, and other devices that operate on the 2.4 GHz band.
●
Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
●
Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
●
If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help
Desk.
Receiving failed
Insufficient space on card
●
There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Receiving failed
Memory card locked
●
The write-protect switch of the memory card in the camera to receive the images
is set to the locked position. Slide the write-protect switch to the unlocked
position.
Receiving failed
Naming error!
●
When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
Insufficient space on server
●
Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
space.
●
Save the images sent via Image Sync (
Check network settings
●
Check to make sure your computer can connect to the Internet with the current
network settings.
File Error
●
116) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
●
Check the paper size setting (
118). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Ink absorber full
●
Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Wi-Fi
Connection failed
●
No access points were recognized. Check the access point settings (
●
A device could not be found. Turn the camera off and on again, and retry the
connection.
●
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
●
The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
No access points found
●
Check to make sure that the access point is turned on.
●
When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
●
Check the access point security settings (
IP address conflict
●
Reset the IP address so that it does not conflict with another.
