Canon PowerShot SX430 IS, Руководство пользователя

Страница: 87 / 146

87
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
4
P Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
3
Enter the access point password.
● Press the [ ] button to access the
keyboard, and then enter the password
(
=
27).
● Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4
Choose [Auto].
● Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
● To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
( = 85).
● To determine the access point password, check on the access
point itself or refer to the user manual.
● If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
● When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, press the [ ][ ]
buttons to choose [Next], and then press the [ ] button.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][
] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
26) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also change the camera nickname on the screen in step
2 (
= 85).
● When the camera is connected to a computer, the camera screen
is blank.
● To disconnect from the camera, turn off the camera.
● If you chose [WPS (PIN mode)] in step 6, a PIN code will be
displayed on the screen. Be sure to set this code in the access
point. Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
Connecting to Listed Access Points
1
View the listed access points.
● View the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
(
=
85).
2
Choose an access point.
● Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.