Things to
Remember
Mastering
the Basics
More Advanced
Techniques
Appendices
3
Table of Contents
Precautions for Connecting the Camera to the Computer
• When connecting the camera to the computer with an interface cable, make sure to connect
the cable directly to the computer’s USB port. The connection may not operate correctly if
you attach the camera to the computer via a USB hub.
• The connection may not operate correctly if you are using other USB devices, excluding
USB mice or keyboards, at the same time as the camera. If this occurs, disconnect the other
devices from the computer and try reconnecting the camera.
• Do not connect two or more cameras at the same time to the same computer. The
connections may not operate correctly.
• Do not allow the computer to go into sleep (standby) mode while a camera is connected
via the USB interface cable. If this does happen, do not disconnect the interface cable. Try
to awaken the computer with the camera in the connected state. Some computers will not
awaken properly if you disconnect the camera while they are in sleep (standby) mode. Please
refer to your computer manual for instructions regarding the sleep (standby) mode.
• Do not disconnect the camera from the computer if CameraWindow is displayed on the
screen.
IMPORTANT
• You are recommended to use an AC adapter (sold separately) when connecting
to a computer. Ensure that you use fully charged batteries if you cannot use an
AC adapter.
• See the
Camera User Guide
for procedures on connecting the camera to the
computer.