Canon PowerShot Elph 340 HS IXUS 265 HS, Руководство пользователя

Страница: 138 / 163

138
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
•
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
• Set the flash mode to [ h
] (
=
61 ).
•
Adjust brightness by using exposure compensation (
=
52 ).
•
Adjust contrast by using i-Contrast (
=
54 , 80 ).
•
Use AE lock or spot metering (
=
53 ).
Subjects look too bright, highlights are washed-out.
• Set the flash mode to [ !
] (
=
33 ).
•
Adjust brightness by using exposure compensation (
=
52 ).
•
Use AE lock or spot metering (
=
53 ).
•
Reduce the lighting on subjects.
Shots look too dark despite the flash firing ( =
29
).
• Shoot within flash range ( =
155 ).
•
Increase the ISO speed (
=
54 ).
Subjects in flash shots look too bright, highlights are washed-out.
• Shoot within flash range ( =
155 ).
• Set the flash mode to [ !
] (
=
33 ).
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
•
Lower the ISO speed (
=
54 ).
•
High ISO speeds in some shooting modes may cause grainy images (
=
43 ).
Subjects are affected by red-eye ( =
36
).
•
Set [Red-Eye Lamp] to [On] (
=
39 ) to activate the red-eye reduction lamp
(
=
3
) in flash shots. Note that while the red-eye reduction lamp is on (for about
one second), it is not possible to shoot, because the lamp is counteracting red-eye.
For best results, have subjects look at the red-eye reduction lamp. Also try increasing
the lighting in indoor scenes and shooting at closer range.
•
Edit images using red-eye correction (
=
80 ).
Recording to the memory card takes too long, or continuous shooting
is slower.
•
Use the camera to perform low-level formatting of the memory card (
=
115 ).
Shooting settings or FUNC. menu settings are not available.
•
Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” (
=
145 – 150 ).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•
Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (
=
115 ,
155 ).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
•
Use the camera to perform low-level formatting of the memory card (
=
115 ).
• Lower the image quality ( =
36 ).
•
Switch to a memory card that supports high-speed recording (
=
155 ).
Zooming is not possible.
•
Zooming is not possible when shooting movies in [ ] mode (
=
46 ).
Subjects look distorted.
• Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
COP
Y