![Canon Power Shot SX710 HS Скачать руководство пользователя страница 64](http://html.mh-extra.com/html/canon/power-shot-sx710-hs/power-shot-sx710-hs_user-manual_60666064.webp)
64
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Recording Various Movies
Still Images
Movies
Recording Movies in Standard Mode
Still Images
Movies
1
Enter [ ] mode.
●
Set the mode dial to [
].
●
Press the [
] button, choose [
] in the
menu, and then choose [
] (
●
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
2
Configure the settings to suit the
3
Shoot.
●
Press the movie button.
●
To stop movie recording, press the movie
button again.
Recording Movies with Smoother Motion
Record movies with smoother motion, at nearly double the frame rate, as
follows.
●
Follow the steps in “Changing Movie
Image Quality” (
[
].
2
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
●
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
●
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
●
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
●
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
●
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
●
To change the number of shots, press the [
][
] buttons
after choosing [
] in step 1. [Blink Detection] (
available for the final shot.
●
The zoom factor cannot be changed with the [
] button after you
press the shutter button all the way down.