Canon Power Shot SX710 HS, Руководство пользователя

Страница: 39 / 177

39
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
A face may not be displayed at a constant size relative to the
screen at some zoom factors, or if the person’s head is tilted or
facing the camera indirectly.
●
During movie recording, a changed zoom factor and camera
operating sounds are recorded.
●
When Auto is on, some shooting information is not displayed,
and some shooting settings cannot be configured.
●
Auto zooming to keep multiple subjects on the screen is not
performed during movie recording, even if faces are detected.
●
You can zoom in or out with the zoom lever, but the original zoom
factor will be restored in a few seconds after you release the
lever.
●
If multiple faces are detected in step 1, you can switch the main
face used for auto zooming by pressing the [
] button.
●
When a detected subject moves toward the edge of the screen,
the camera zooms out to keep the subject on the screen.
●
The zoom factor cannot be changed after you press the shutter
button all the way down in self-timer mode (
=
41).
●
The camera prioritizes zooming to keep subjects on the screen.
For this reason, it may not be possible to maintain a constant
face display size, depending on subject movement and shooting
conditions.
●
When no face is detected, the camera zooms to a certain level
and stops zooming until a face is detected.
Auto Zooming in Response to Subject Movement
(Auto Zoom)
Still Images Movies
The camera automatically zooms in and out to keep detected faces
(
=
74) at a constant size. If the person moves closer, the camera
automatically zooms out, and vice versa. This size can also be adjusted,
as needed.
1
Enter [ ] Auto mode.
●
Press and release the [
] button quickly.
●
[ ] is displayed.
●
A white frame is displayed around the
detected face, and the camera zooms
in and out to keep the subject on the
screen.
●
When multiple faces are detected, a
white frame is displayed around the main
subject’s face and up to two gray frames
around other faces, as the camera zooms
to keep these subjects on the screen.
2
Shoot.
●
Auto zooming continues even after you
shoot, and the frames are still displayed.
●
To cancel auto zooming, press the [ ]
button again. [ Auto: Off] is displayed.