Canon PIXMA MX882 Series, Руководство по обслуживанию

Страница: 12 / 80

(Applicable ink tank
icon) the supported ink tanks.
Ink tank not
recognized. [1750] U141 Appropriate ink tank
is not installed. Install
the appropriate ink
tank.
A non-supported ink tank
is installed (the ink tank
LED is turned off). Install
the supported ink tanks. - Ink tank
Ink tank not
recognized. [1682] U150 The following ink
tank cannot be
recognized.
(Applicable ink tank
icon)
A hardware error occurred
in an ink tank (the ink tank
LED is turned off).
Replace the ink tank(s). - Ink tank
No ink (no raw
ink). [1688] U163 The ink has run out.
Replace the ink tank.
(Applicable ink tank
icon)
Replace the empty ink tank
(s), and close the scanning
unit (cover).
Printing with an empty ink
tank can damage the
machine.
To continue printing
without replacing the ink
tank(s), press the Stop
button for 5 sec. or longer
to disable the function to
detect the remaining ink
amount. After the
operation, it is recorded in
the machine that the
function to detect the
remaining ink amount was
disabled. - Ink tank
- Spur unit
Non-supported
hub. [2002] --- An unsupported USB
hub is connected.
Remove the hub.
Remove the applicable
USB hub from the
PictBridge (USB)
connector.
Document
feeder cover not
closed. [2800] --- The feeder cover is
open. Close cover and
press [OK].
Close the document feeder
cover, and press the OK
button. - DF unit
- DF switch unit
Paper jam in
the ADF. [2801] --- Document in ADF.
Check document in
ADF, then press [OK]
and redo operation.
Remove the paper from the
ADF, and press the OK
button. - DF unit
No paper in the
ADF. [2802] --- No document in ADF.
Press [OK], then load
document and redo
operation.
Press the OK button to
clear the error. - DF unit
Paper in the [2803] --- Document size is too Remove the paper from the - DF unit
7 / 76