10-A
3
1
2
6
7
9
8
WEP
WPA/WPA2
Make sure that the network key is correct, then
press the
OK
button.
Go to
on page 13.
Enter the network key, then press the
OK
button.
Enter upper and lower case letters of the alphabet
correctly. Letters are case sensitive.
•
Select the WEP key number you want to use,
then press the
OK
button.
When using AirPort, select
WEP key 1
in the
screen. Selecting other key numbers will disable
the connection between the machine and AirPort.
•
(P.13)
Disable
(P.13)
Select
Directly enter the access point name
, then
press the
OK
button.
If you are living in an apartment, nearby access points in
use may be detected.
•
Enter the access point name/network name (SSID)
using the Numeric buttons, then press the
OK
button.
For details on how to check the access point name/network name (SSID), refer to the
manual supplied with the access point or contact its manufacturer.
•
Enter the same access point name/network name (SSID)
as that of the access point on the machine.
•
Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.
•
Go to either of the following steps according to the selected
security protocol.
•
Disable
WEP
WPA/WPA2
Go to
.
Go to
on page
13.
Go to
on
page 13.
Select a security protocol for the access point, then
press the
OK
button.
When
WEP 40 bit
or
WEP 128 bit
is selected in AirPort Utility (AirPort Admin Utility), select
WEP
.
•
When
WEP (Transitional Security Network)
is selected in AirPort Utility, select
WPA2-PSK
(AES)
.
•
For details on how to enter characters, refer to "Character
Entry" on page 10.
Make sure that the access point name/network name
(SSID) is correct, then press the
OK
button.
