(2/37)
1. LIST OF ERROR DISPLAY
Errors and warnings are displayed by the following ways:
- Operator call errors are indicated by the Alarm lamp lit in orange, and the error and its solution
are displayed on the LCD.
- Messages during printing from a computer are displayed on the printer driver Status Monitor.
- Error codes are printed in the "operator call/service call error record" area in EEPROM
information print.
1-1. Operator Call Errors (Alarm Lamp Lit In Orange)
Buttons valid when an operator call error occurs:
- ON button:
To turn the printer off and on again.
- OK button:
To clear and recover from an error. In some operator call errors, the error will
automatically be cleared when the cause of the error is eliminated, and pressing
the OK button may not be necessary.
- Stop button: To cancel the job at error occurrence, and to clear the error.
Error
Error
code
U No. Message on the LCD
Solution
Parts that are likely to be
faulty
No paper in the
rear tray.
[1000] --- There is no paper.
Load paper and press
[OK].
Set the paper in the rear
tray, and press the OK
button.
- PE PWB unit
- Pick-up roller
- Drive unit
- Logic board
The paper output
tray closed.
[1251] --- Paper output tray is
closed. Open the paper
output tray.
Open the paper output tray,
and press the OK button.
Paper jam.
[1300] --- The paper is jammed.
Clear the paper and
press [OK].
Remove the jammed paper,
and press the OK button.
- PE PWB unit
- Logic board
Ink cartridge not
installed, or not
properly installed.
[1401] U051 Print head is not
installed. Install the
print head.
Install the ink cartridge
properly. If the error is not
cleared, the ink cartridge
may be defective. Replace
the ink cartridge.
- Ink cartridge
- Carriage unit
- Logic board
Ink cartridge
temperature
sensor error.
[1403] U052 The type of print head
is incorrect. Install the
print head.
Re-set the ink cartridge. If
the error is not cleared, the
ink cartridge may be
defective. Replace the ink
cartridge.
- Ink cartridge
- Carriage unit
- Logic board
Non-supported
ink cartridge
installed.
[1485] U059
The ink cartridge
cannot be recognized.
A non-supported ink
cartridge is installed. Install
the supported ink cartridge.
If the error is not cleared,
the ink cartridge may be
defective. Replace the ink
cartridge.
- Ink cartridge
- Carriage unit
- Logic board
Ink cartridge in a
wrong position.
[1486] U076 Some ink cartridges
are not installed in
place.
Install the ink cartridge(s) in
the correct position. If the
error is not cleared, the ink
cartridge may be defective.
Replace the ink cartridge.
- Ink cartridge
- Carriage unit
- Logic board
Содержание PIXMA MX340 Series
