Canon PIXMA MP970 Скачать руководство пользователя страница 17

Страница: 17 / 88

*1: General notes:

- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly.

See

3-2. Special Notes on Repair Servicing

or the Parts Catalog for details.

- Do not drop the ferrite core, which may cause damage.

- Protect electrical parts from damage due to static electricity.

- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor discharging

to protect the logic board ass'y from damages).

- Do not touch the timing slit strip film, timing slit disk film, and timing slit disk eject film. No grease or abrasion is allowed.

- Protect the units from soiled with ink.

- Protect the housing from scratches.

- For the MP610 automatic print head alignment, use Matte Photo Paper (MP-101) to ensure alignment accuracy.

- Exercise caution with the screws, as follows:

i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO NOT

loosen them in other cases).

ii. DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning (they are

not adjustable in servicing)

Input carriage lift gear

portions.

[See

3-3. Adjustment /

Settings, (3) Grease
application

, for details.]

Easy-Scroll Wheel base

Document pressure plate
unit

After replacement:

1. Confirm the document

pressure plate sheet position.
[See

3-3. Adjustment /

Settings, (2) Document
pressure plate sheet
replacement

, for details.]

2. Check the LCD and operation

panel.
[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

Document pressure plate
sheet

Document pressure plate
sheet frame

Scanner unit

Operation panel board
ass'y

- Be cautious not to scratch or

damage the LCD hinge FFC.

At replacement:

1. Check the LCD and operation

panel.
[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

LCD viewer unit

Timing slit strip film

- Upon contact with the film,

wipe the film with ethanol.

- Confirm no grease is on the

film. (Wipe off any grease
thoroughly with ethanol.)

- Do not bend the film

After replacement:

1. Perform print head alignment

in the user mode.

2. Perform LF / Eject correction

in the service mode.
[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

- Service test print

Timing slit disk film

Timing slit disk eject film

Print head

After replacement:

1. Perform print head alignment

in the user mode.

- Service test print

<3-1. Notes on Service Part Replacement>

15 / 45

Содержание PIXMA MP970

























































































Результаты поиска

Содержание PIXMA MP970

Отзывы:

Похожие инструкции для PIXMA MP970

Бренды по названию

Популярные бренды

Canon PIXMA MP970, Руководство по обслуживанию

Результаты поиска

Содержание PIXMA MP970

Отзывы:

Похожие инструкции для PIXMA MP970

Бренды по названию

Популярные бренды