Canon PIXMA MP970, Руководство по обслуживанию, Страница: 10 / 88

2-3. Other Error Messages
- Paper feed motor
- Logic board
19 times Ink tank position sensor
error [6502] None of the ink tank position is detected. - Platen unit
- Logic board
22 times Scanner home position
error [5010] The scanner unit cannot detect the home
position, or the scanner unit warming-up is
not performed properly at power-on.
On the LCD, "Scanner is not operating
correctly." is displayed.
- Scanner unit
Power LED
turned off, and
Alarm LED lit ROM / RAM error --- The check sum value is incorrect in the
ROM check or RAM check at hard-power-
on. - Logic board
Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or
EEPROM information print). If the counter value is 7% or more, also replace the ink absorber kit when replacing
the logic board ass'y. If the counter value is less than 7%, register the current ink absorber counter value to the
replaced new logic board instead.
[See 3-3. Adjustment / Settings, (6) Service mode, for details.]
Message on the LCD Cause Solution
The selected paper cannot be fed from
cassette. Change the paper source and
press [OK]. The paper type being used (business card,
Credit Card size paper, or stickers, etc.) is not
supported for paper feeding from the cassette. Change the paper source to the rear tray.
Cannot specify the followings together.
Change one of the settings. Settings made conflict each other. (e.g.
Selecting borderless printing on plain paper) Change the settings so that they will not
conflict each other.
Device memory is full. Reduce the
amount of photos, films, and copies to
scan. The memory is not sufficient to do the print
job in copying. Reduce the amount of data to be printed, or
print from a computer.
Press <>.
(<>: Color button icon)
The Black button was pressed, but it is
invalid. A temporary error. Press the Color button to
continue the operation.
Press <>.
(<>: Black button icon)
The Color button was pressed, but it is
invalid. A temporary error. Press the Black button to
continue the operation.
There are no photos in memory card. Supported image files are not in the memory
card. A temporary error.
- Confirm that supported image files are in
the memory card.
- Images with double-byte characters used in
the file name (or folder name) may not be
recognized. Change the file (or folder)
name so that it contains only single-byte
alphanumeric characters.
- If images are edited on the computer, print
them from the computer.
The value exceeds the number of
copies you can print. During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999. A temporary error. The last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Memory card is not set. Insert the card
after checking the direction. The memory card is not inserted in the slot
properly. Set a memory card.
DPOF information is not saved in the
memory card. DPOF print was selected in the menu, but no
DPOF files are contained in the memory
card. A temporary error. The LCD automatically
returns to the display before the error
occurrence.
The number of copies to print is not
set. Input the number of copies. Printing was attempted with the print quantity
left "0" (zero). A temporary error. Specify the print quantity.
This layout is available only for A4 or In Layout print, "Mixed 1, 2, or 3" which is A temporary error. The LCD automatically
8 / 45