Canon PIXMA MP970 Скачать руководство пользователя страница 16

Страница: 16 / 88

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)

MP970

TABLE OF CONTENTS

Service part

Notes on replacement

Adjustment / settings

Operation check

Logic board ass'y

- Before removal of the logic

board ass'y, remove the power
cord, and allow for approx. 1
minute (for discharge of
capacitor's accumulated
charges), to prevent damages to
the logic board ass'y.

- Before replacement, check the

ink absorber counter value (by
service test print or EEPROM
information print).
[See

3-4. Verification Items, (1)

Service test print

for details.]

After replacement:

1. Initialize the EEPROM.
2. Set the ink absorber counter

value.

3. Set the destination in the

EEPROM.

4. Correct the CD / DVD and

automatic print head
alignment sensors.

5. Check the ink system function.
6. Perform LF / Eject correction.
7. Perform button and LCD test.

[See

3-3. Adjustment /

Settings, (6) Service mode

for details of 1 to 7.]

8. Perform print head alignment

and LCD language setting in
the user mode.

9. Reset the LAN settings.

- EEPROM information print
- Service test print
- Printing via USB connection
- Copying
- Direct printing from a digital

camera (PictBridge)

- Reset the LAN settings
- Confirm the LAN setting

information

- Confirm the MAC address
(EEPROM information print)

Absorber kit

After replacement:

1. Reset the ink absorber counter.

[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

- Ink absorber counter print
(Performed automatically after

resetting the ink absorber
counter.)

Carriage unit

At replacement:

1. Apply grease to the sliding

portions.
[See

3-3. Adjustment /

Settings, (3) Grease
application

2. Check the ink system

function.
[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

3. Perform print head alignment

in the user mode.

- Service test print (Confirm

CD / DVD and automatic
print head alignment sensor
correction, and ink system
function.)

Paper feed motor

- The red screws securing the

paper feed motor are allowed to
be loosened only for paper feed
motor replacement. (DO NOT
loosen them in any other cases.)

At replacement:

1. Adjust the paper feed motor.

[See

3-3. Adjustment /

Settings, (1) Paper feed motor
adjustment

, for details.]

Platen unit

After replacement:

1. Check the ink system

function.

2. Perform LF / Eject correction.

[See

3-3. Adjustment /

Settings, (6) Service mode

for details.]

- Service test print

PR lift shaft ass'y

At replacement:

1. Apply grease to the sliding

- Service test print

14 / 45

Содержание PIXMA MP970

























































































Результаты поиска

Содержание PIXMA MP970

Отзывы:

Canon PIXMA MP970, Руководство по обслуживанию, Страница: 16 / 88

Результаты поиска

Содержание PIXMA MP970

Отзывы: