Canon PIXMA mini 260 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 92

background image

71

Troubleshooting

*1

To resume printing, you can press the

OK

button on the printer instead of selecting

Continue

.

Cannot Print Properly through Wireless
Communication

Hardware Error

The optional battery has running short. Follow the procedure
below.

(1)

Turn the Printer off.

(2)

Connect the supplied AC adapter or attach the charged

battery.

(3)

Turn the Printer on.

The ink tank error has occurred.
Replace the ink tank. See “Replacing an Ink Tank” on page 47.

Printer error

An error requiring servicing might have occurred (

POWER

lamp

and

Alarm

lamps flash alternately).

Disconnect the cable between the printer and the camera, turn
off the printer, and unplug the power cord of the printer from the
power supply. After a while, plug the power cord of the printer
back in, turn on the printer, and then reconnect the camera to the
printer.
If the same error occurs, contact a Canon service representative.

Cause

Action

Printer placement is
inadequate.

When printing through infrared communication, confirm that the
IrDA ports on the printer and the mobile phone are placed face to
face with each other at a proper angle and distance, and that
there is nothing blocking them. Then, retry printing.
Operational distance and angle vary depending on the
specifications of your mobile phone and your operating
environment, but generally place the printer within around 8
inches / 20 cm from the mobile phone in a position that enables
proper communication.

During infrared communication,
infrared rays were blocked.

During sending, be careful not to interrupt infrared
communication with the printer. If it is interrupted, send the data
from the mobile phone or the PDA again.

The conditions to print properly
through the infrared
communication are not met.

The infrared communication function of the printer is only
compatible with mobile phones with IrDA compliant infrared
communication ports. Printing through infrared communication
cannot be performed by any other types of mobile phones.
See “Printing Photographs from a Wireless Communication
Device” on page 36.

The mobile phone or the PDA is
too far away from the printer
(For Bluetooth communication).

Place the mobile phone or the PDA within 33 feet (10 m) of the
printer when attempting to print via a wireless communication.

Camera Error Message

Try This

«
...
71
72
73
74
75
...
»

Содержание PIXMA mini 260





























































































Отзывы:

Нет отзывов

Похожие инструкции для PIXMA mini 260

Бренд: Wasp Страницы: 2

Saddle Finisher-AF2

Бренд: Canon Страницы: 244

Бренд: QMS Страницы: 180

Бренд: Oki Страницы: 99

Бренд: ioCorp Страницы: 18

Бренд: MF DIGITAL Страницы: 2

Бренд: Labelmate Страницы: 61

Бренд: Oce Страницы: 330

Бренд: Sagem Страницы: 102

Бренд: Belkin Страницы: 8

Бренд: 3D Printing Systems Страницы: 56

Бренд: Unisys Страницы: 144

Бренд: Olivetti Страницы: 97

Бренд: Oki Страницы: 110

Бренд: Z Corporation Страницы: 70

WorkForce 610 Series

Бренд: Epson Страницы: 52

Бренд: Epson Страницы: 4

WorkForce 545 Series

Бренд: Epson Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды