Canon OPTURA200 MC Скачать руководство пользователя страница 41

Страница: 41 / 192

Using the Full

Range of Featur

Selecting from the Menus

1. Turn the POWER switch and the TAPE/CARD switch to the

desired settings.

2. Press the MENU button to open the menu.

• One of the main menus appears, according to the settings of the

TAPE/CARD switch and the POWER switch.

3. Pull the selector dial up or down and move the arrow to the

desired submenu.

4. Press the selector dial in to select.

• The submenu appears.

5. Pull the selector dial up or down and move the arrow to the

desired function.

6. Press the selector dial in to select.

• The function and its settings only appear.

7. Pull the selector dial up or down and move the arrow to the

desired setting.

• If you are setting a function other than the white balance or shutter

speed, the function will be set if you skip to step 11.

8. Press the selector dial in to select.

• The function is set and you return to the submenu.

9. Pull the selector dial up or down and move the arrow to

RETURN.

10.Press the selector dial in to select.

• You return to the main menu.

11.Press the MENU button.

• The main menu disappears.

Notes:

• Pressing the MENU button at any time closes the menu.
• Selecting

RETURN takes you back one menu, or closes the main menu.

TV SCREEN

SET

2, 11

3-10

Содержание OPTURA200 MC

































































































































































































Результаты поиска

Содержание OPTURA200 MC

Отзывы:

Бренды по названию

Популярные бренды

Canon OPTURA200 MC, Инструкция по эксплуатации

Результаты поиска

Содержание OPTURA200 MC

Отзывы:

Бренды по названию

Популярные бренды