103
E
Editing
5. Press AUDIO DUB.
• AUDIO DUB. and
appear on the display.
6. Press the PAUSE button (and start play on the other audio
device if AUDIO IN).
• Audio dubbing starts.
• If MIC. IN, direct your voice into the microphone.
•
changes to
.
7. When you get to the point where you wish to stop dubbing,
press the STOP button (and then stop play on the other
audio device if AUDIO IN).
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set zero set memory (
90) at the place you want to stop
audio dubbing, then every time you return to that position, audio
dubbing will cancel.
• If instead of pressing STOP you press PAUSE, the camcorder will return
to the playback pause mode.
Notes:
• You cannot use the DV terminal while adding sound.
• You might want to adjust the audio mix (
104) when playing back a
tape with added sound.
• There may be a loss of sound quality if you add sound to a tape recorded
on a camcorder other than the OPTURA200 MC.
• After adding sound 3 or more times to the same place on a tape, there
may be some loss in sound quality.
