Canon Oce Arizona 1200 Series, Руководство пользователя

Страница: 174 / 226

9.
Wipe the suction-head on a clean piece of new lint-free wipe before proceeding to the next
printhead.
IMPORTANT
During maintenance, be careful not to touch the nozzles or the nozzle plate as this can
damage the printhead.
10.
Use a dry swab to pick up any excess ink from around the edge of the printhead opening in the
pan (see the white line with arrows in the image below). Take special care to remove any excess
ink, flush or alcohol on the metal plate between the pan and the printhead (see the area covered
by the two ellipses in the picture below). A single swab can be used for each color channel or use
it until the swab becomes saturated with ink.
11. Slide the maintenance station drawer back to its closed position. The carriage will move back to
its previous print-ready height.
IMPORTANT
Close the drawer gently to avoid disturbing the ink in the printheads. A hard bump can
temporarily create nozzles out.
12.
Print a Nozzle Check to evaluate print quality.
NOTE
If the Nozzle Check print shows that a printhead still has a few nozzles out you can slide
the suction-head over that printhead again. Then print another Nozzle Check if there
are still nozzles out.
Manual Printhead Maintenance
174 Chapter 12 - Printer Maintenance
Océ Arizona 1200 Series