manualshive.com logo in svg

Canon Oce Arizona 1200 Series, Руководство пользователя

Поделиться
Скачать
Canon Oce Arizona 1200 Series Скачать руководство пользователя страница 135

may look like with a 50% and 100% flood fill. If you need to see your image for editing purposes,
simply turn off the visibility of the Spot Channel.

[63] Flood 50 PSD

[64] Flood 100 PSD

9.

In some cases, it may be easier to select the area in which you don't want any white ink data and
then select the inverse.

[65] Select

[66] Select Inverse

10.

It is also possible to edit the spot channel much as you would any other data in a PhotoShop
document, making use of such tools as the Eraser.

11.

Save your image as a either a TIFF or PSD format file (see the points below to determine the best
format).

[67] Save with Spot Option

• If you intend to use this file in a vector-based program such as Illustrator, save it as a .PSD file

in order for all channel information to be carried over. The white spot color is printed in the
order it appears in the Channels palette, with the spot channel printing underneath CMYK data.
However, when exported as a .PSD to Illustrator, this data will appear above the image data.
This is the correct format protocol for Illustrator.

• Save as TIFF and ensure that the spot colors option is enabled if you plan to bring this image

directly into ProductionHouse.

• It is also possible and sometimes preferable to print directly from PhotoShop to Rip-Queue. For

instructions on how to do this, see document provided on the Onyx web site "Printing From a
Mac", which also contains information on printing from Windows-based systems.

How to Create Spot Data in Photoshop

Chapter 9 - How to Manage a White Ink Workflow

135

Océ Arizona 1200 Series

Содержание Oce Arizona 1200 Series



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды