Canon oce 31x5e, Ежедневное обслуживание

Страница: 40 / 137

40 Océ 31x5E Copy jobs & daily maintenance
▼
Copying standard sized originals using the automatic feeder
1
Place the entire set of originals face down against the left side of the tray in the
automatic feeder and adjust the original guides.
Note:
The originals must not be too curled. See also ‘Originals that can be
used’ on page 94. Remove any paper clips and staples.
The automatically selected paper size is shown above the ‘Paper’ section title.
If there is no identical paper size available, the nearest paper size will be
selected automatically, which will result in a reduced or enlarged copy. In this
case, the automatically selected percentage will be shown above the ‘Basic’
section title.
2
Indicate whether the originals are 1-sided or 2-sided, and choose 1-sided or
2-sided copies using the ‘Original’ and ‘Copy’ functions.
3
If a 1:1 copy is selected and you want a reduced or enlarged copy instead,
choose the required paper size: open the ‘Paper’ section and select the ‘Paper
input’ settings. Then use the function button below the paper sizes in order to
select the required paper size and orientation.
4
Enter the desired number of sets using the copy quantity buttons.
5
If 11 x 17” paper size is selected, adjust the 11 x 17” output support.
6
Press the start button ( ).