manualshive.com logo in svg

Canon NP6551, Руководство оператора

Поделиться
Скачать
Canon NP6551 Скачать руководство пользователя страница 15

1-2

●

Do not install the copier near alcohol,
paint thinner or other inflammable
substances. If inflammable
substances come into contact with
electrical parts inside the copier, this
may result in fire or electrical shock.

●

Do not place the following items on
the copier. If these items come into
contact with a high-voltage area inside
the copier, this may result in a fire or
electrical shock.
• Necklaces and other metal objects
• Cups, vases, flowerpots and other

containers filled with water or liquids
If these items are dropped or spilled
inside the copier, immediately turn
OFF the power switch and unplug
the power plug from the outlet.
Then, contact your service
representative.

     Safety Considerations

Installation

WARNING

CAUTION

●

Do not install the copier in unstable
locations such as on unsteady
platforms or in tilted places, or in
locations which are subject to
excessive vibrations, as this may
cause the copier to fall or tip over,
resulting in personal injury.

●

Do not install the copier so that the
ventilation ports are blocked by
objects.  If the ventilation ports are
blocked, heat will build up inside the
copier and may result in a fire.

●

Do not place heavy objects on the
copier, as they may tip over or fall
resulting in personal injury.

Содержание NP6551





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды