manualshive.com logo in svg

Canon NP6412, Руководство по обслуживанию

Поделиться
Скачать
Canon NP6412 Скачать руководство пользователя страница 346

CHAPTER 11  TROUBLESHOOTING

COPYRIGHT  ©  1999  CANON INC.                   CANON  NP6512/6612/7120/7130/7130F  REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

11-60

 13  The back of the copy is soiled.

YES/NO

NO

YES

YES

NO

Cause

------------

Transfer
guide assem-
bly

Feeding
assembly
Pickup guide
assembly,
Delivery
roller

Step

1

2

3

Checks

Turn off the power while copy paper is
moving through the feeding assembly.
Is the back of the paper soiled?
Is the transfer guide assembly soiled?

Is the feeding assembly soiled?

Action

Go to step 3.

1. Clean the transfer

guide.

2. Clean the registra-

tion roller.

3. Check the varistor.
4. Check the develop-

ing assembly for
leakage of toner.

Clean the feeding
assembly.
Clean the pickup guide
assembly and the
delivery roller.

12 The copy has white spots. (horizontal)

YES/NO

YES

YES

YES

NO

Cause

Copy paper

Scanner rail

Scanning
lamp, Devel-
oping bias

Step

1

2

3

Checks

Is the paper of a recommended type?

Try paper fresh out of package. Is the
problem corrected?

Is the problem noted at the same
position on all copies?

Action

Try a recommend
type. If the results are
good, ask the user to
use a recommended
type.
The paper may be
moist. Instruct the user
on the correct method
of storing paper.
1. Check the scanner

rail for foreign
matter.

2. Adjust the tension

of the scanner cable.

Check the scanning
lamp for flickering
and the presence/
absence of a develop-
ing bias.

Содержание NP6412
























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды